Comments on: Stepper Motor With LabVIEW http://bono02.wordpress.com/2007/11/04/stepper-motor-with-labview/ I want to change the world! I have my part! Fri, 11 Dec 2009 14:53:57 +0000 http://wordpress.com/ hourly 1 By: Bondhan Novandy http://bono02.wordpress.com/2007/11/04/stepper-motor-with-labview/#comment-264 Bondhan Novandy Sun, 04 Oct 2009 13:44:31 +0000 http://bono02.wordpress.com/2007/11/04/stepper-motor-with-labview/#comment-264 Hi, I guess it will work. First you need to tell me which NI hardware do you use. Hi, I guess it will work. First you need to tell me which NI hardware do you use.

]]> By: Joseph http://bono02.wordpress.com/2007/11/04/stepper-motor-with-labview/#comment-255 Joseph Fri, 11 Sep 2009 10:24:45 +0000 http://bono02.wordpress.com/2007/11/04/stepper-motor-with-labview/#comment-255 My project involves controlling a stepper motor using a labview code. I have connected the unipolar stepper motor to the parallel port via the ULN2003A. The ULN2003A acts as the motor driver. I dont yet have the circuitry. This is my idea, i want to implement a house lift using a stepper motor in the folwing manner. During the motor's clockwise rotation the lift will be moving upwards and during the anticlockwise rotation, the lift will be moving down to groung floor. This will act as a lift which can be taking luggage upstairs in a building. Now my prof wants me to control the stepper motors rotation using a labview code. Is my idea going to work? Help me with your ideas and complements on this urgent project!! I will appreciate every single detail. Thanks My project involves controlling a stepper motor using a labview code. I have connected the unipolar stepper motor to the parallel port via the ULN2003A. The ULN2003A acts as the motor driver. I dont yet have the circuitry.
This is my idea, i want to implement a house lift using a stepper motor in the folwing manner. During the motor’s clockwise rotation the lift will be moving upwards and during the anticlockwise rotation, the lift will be moving down to groung floor. This will act as a lift which can be taking luggage upstairs in a building.
Now my prof wants me to control the stepper motors rotation using a labview code. Is my idea going to work? Help me with your ideas and complements on this urgent project!! I will appreciate every single detail. Thanks

]]> By: Joseph http://bono02.wordpress.com/2007/11/04/stepper-motor-with-labview/#comment-254 Joseph Fri, 11 Sep 2009 09:57:57 +0000 http://bono02.wordpress.com/2007/11/04/stepper-motor-with-labview/#comment-254 My project involves controlling a stepper motor using a labview code. I have connected the unipolar stepper motor to the parallel port via the ULN2003A and would like your help guys. My prof insists on this and im new in this field. Please help me with the code and other necessary information expexcted during implementation. My project involves controlling a stepper motor using a labview code. I have connected the unipolar stepper motor to the parallel port via the ULN2003A and would like your help guys. My prof insists on this and im new in this field. Please help me with the code and other necessary information expexcted during implementation.

]]> By: Bondhan Novandy http://bono02.wordpress.com/2007/11/04/stepper-motor-with-labview/#comment-249 Bondhan Novandy Wed, 26 Aug 2009 10:29:21 +0000 http://bono02.wordpress.com/2007/11/04/stepper-motor-with-labview/#comment-249 You can start by first describing your project. You can start by first describing your project.

]]> By: nazila http://bono02.wordpress.com/2007/11/04/stepper-motor-with-labview/#comment-246 nazila Wed, 26 Aug 2009 08:06:28 +0000 http://bono02.wordpress.com/2007/11/04/stepper-motor-with-labview/#comment-246 i am going to make a simulation... actually i am going to simulate an insulin pump that work with stepper motor ...do you know how can i start? i am going to make a simulation… actually i am going to simulate an insulin pump that work with stepper motor …do you know how can i start?

]]> By: Bondhan Novandy http://bono02.wordpress.com/2007/11/04/stepper-motor-with-labview/#comment-243 Bondhan Novandy Sun, 23 Aug 2009 06:38:33 +0000 http://bono02.wordpress.com/2007/11/04/stepper-motor-with-labview/#comment-243 Hi, are you going to make a simulation or directly control a stepper motor using driver, so on...? Hi, are you going to make a simulation or directly control a stepper motor using driver, so on…?

]]> By: Bondhan Novandy http://bono02.wordpress.com/2007/11/04/stepper-motor-with-labview/#comment-242 Bondhan Novandy Sun, 23 Aug 2009 06:36:46 +0000 http://bono02.wordpress.com/2007/11/04/stepper-motor-with-labview/#comment-242 Hi, you can use a constant (int). The number of the boardID can be seen in MAX. Hi, you can use a constant (int). The number of the boardID can be seen in MAX.

]]> By: Darwin http://bono02.wordpress.com/2007/11/04/stepper-motor-with-labview/#comment-241 Darwin Fri, 21 Aug 2009 18:48:06 +0000 http://bono02.wordpress.com/2007/11/04/stepper-motor-with-labview/#comment-241 Hi, Could you please tell me the name of the icon that is connected to the boardID and Port. I'm sorry if this question sounds really dumb. I am new to LabVIEW, and I'm using 8.6. I've just not been able to find this icon on the express VIs. Thank you so much Hi,

Could you please tell me the name of the icon that is connected to the boardID and Port. I’m sorry if this question sounds really dumb. I am new to LabVIEW, and I’m using 8.6. I’ve just not been able to find this icon on the express VIs.

Thank you so much

]]> By: Darwin http://bono02.wordpress.com/2007/11/04/stepper-motor-with-labview/#comment-240 Darwin Thu, 20 Aug 2009 19:21:01 +0000 http://bono02.wordpress.com/2007/11/04/stepper-motor-with-labview/#comment-240 Hi , I'm using LabVIEW 8.6. Could you please tell me the subvi that is connected to the Board ID & Port(1) is (wondering if it's a DAQmx create channel)? and also what is the subvi with in the flat sequence structure? I'm new to LabVIEW and have trouble findingin these icons on the palette. Sorry if this question sounds really dumb. Thank you so much! Hi ,

I’m using LabVIEW 8.6. Could you please tell me the subvi that is connected to the Board ID & Port(1) is (wondering if it’s a DAQmx create channel)? and also what is the subvi with in the flat sequence structure? I’m new to LabVIEW and have trouble findingin these icons on the palette. Sorry if this question sounds really dumb.
Thank you so much!

]]> By: nazila http://bono02.wordpress.com/2007/11/04/stepper-motor-with-labview/#comment-237 nazila Sun, 16 Aug 2009 10:09:50 +0000 http://bono02.wordpress.com/2007/11/04/stepper-motor-with-labview/#comment-237 Hi, I have never worked with LabView , and I have to simulate stepper motor and control it with LabView. I don’t know what do I have to do... Does anybody have some instructions how to start? Hi,
I have never worked with LabView , and I have to simulate stepper motor and control it with LabView. I don’t know what do I have to do… Does anybody have some instructions how to start?

]]>