Tomorrow I’ll return to my country. I’ve been here (korea) for 2 years and 3 months. I underwent good and also hard time here, and Alhamdulillah, gladly I could pass them all. Here is a small video what I did for almost 2 years work:
I’d like to thank for everyone who has helped me during my stay in Korea.
The details are on my thesis, please note that the data is in preliminary test.
Reference:
A 6-DOF Gait Rehabilitation Robot with Upper and Lower-Limb Connections that Allows Walking Velocity Updates on Various Terrains. Jungwon Yoon, Bondhan Novandy, Chul-ho Yoon, and Ki-Jong Park. IEEE Transactions on Mechatronics. Focused Sections: Healthcare Mechatronics. 2010. (Accepted)
Welcome home, Bond
Hi Bondhan,
I came to your blog when searching for how to control a stepper motor using labview but I found it far more interesting than that…….
I am currently considering admissions into a masters program in Korea (KAIST) but having studied my bachelors in Hong Kong for the past 3 years, I have become dissillusioned with an Allahless society but not withstanding I still want to get a good engineering degree and thats why I am considering Korea….If you can give me any info about the lifestyle you know like (5 daily prayers, eating halal…etc) I will appreciate it. in my e-mail.
Thank you very much in advance
Ahmed
Sorry, I can not help you. I’d been to KAIST just for a conference, so I do not know well about Islamic society there. As you know, Korea, compared to Japan, the number of Muslim is less.
Well, in my lab, I could pray 5 times a day, the professor is very tolerant, I even prayed in his car during trips. Korean people do not know about Islam very well, about the daily prayers that we must do, and the forbidden to eat pork or meat -slaughtered without mentioning Allah’s name.
The professor is the key for this, some professors are old fashioned (maybe because they never met any moslems before), and some are tolerant, most probably because they met moslems before or maybe they just don’t care about religion (As long as you do well they don’t care about anything).
Anyone disagree?
Thanks for the comments, I will weigh my options first before leaping like you said “the key is the professor” so I will try to find a suitable one……
salaam
I saw your project about servo motor control with sliding mode control.
I am master student in Iran and I would like learn about this project.
If is It possible send for me all document about this project (matlab mfiles and simulink).
fi aman alah
[...] is not that good. However, after tuning the control parameters, the whole result can be seen in here. It is fully programmed using LabVIEW & LabVIEW (RT) Possibly related posts: (automatically [...]
mAs..bondan….
boleh ngak aku minta file matlabnya
cuma smc..
makasih sebelumnya
Hi, you can find a simulation -not fully related with this current article- but it includes Sliding Mode Control (SMC) for DC motor in Matlab and LabView.
Click here to download (remove the extension.pdf).
nice post..
good luck!!!
hii Mr.Bondhan Novandy
Myself Nikhil George.I had seen a video posted by you in youtube regarding the rehabilation project.We are also doing a similar project for our final year SIP/MP…We are using maxon motors,epos and can module.If you are intrested to help us in assisting our works it will be a great releif for us as we are entirely new to this software and enviornment.Hoping to hear from you soon …thnx